Posted by Configuring the Linksys RE7000 extender device at your place is not a complicated process. By doing this, without any interference, you can enjoy fast internet speed at any place. To get all the benefits of this gadget consider all the below instructions.
Unbox Linksys RE7000 Extender
When you do the unboxing of this device you will get only two things.
- Linksys RE7000 extender unit
- Manual booklet
Linksys RE7000 Extender Benefits
- Extend the range of the main router WiFi signals.
- At all places enjoy fast internet speed.
- Place the Linksys extender device at any location.
- Linksys RE7000 extender supports the dual frequency bands i.e., 2.4GHz and 5GHz band.
- Compatible with any type of existing router.
Access Linksys RE7000 Extender Login Page
To access the Linksys RE7000 extender login page you will need a few things.
- Any WiFi device with access to the web browser.
- Keep ready the default login credentials.
- Must know the default IP or web address of Linksys.
Log Into Extender:
- First, in the specific power socket place the Linksys RE7000 extender power plug.
- Later, take the computer and open the WiFi settings.
- Now, select the Linksys_EXT network and connect the WiFi device to that network.
- Next, open Chrome on a connected computer and type in extender.linksys.com in the URL bar.
- Further, fill in all the details which are shown on display.
- In the end, tap on the login icon to finish the Linksys extender login process.
Methods Of Linksys RE7000 Extender Configuration
For the Linksys RE6500 setup, there are two methods.
By Web-Based Configuration Method
- Initially, near the router in the specific wall socket place the Linksys RE7000 extender power plug.
- After that, Grab a WiFi device. (Make sure that the WiFi unit must be attached to the RE7000 extender network)
- Now, open the search engine and fill in the default web address extender.linksys.com in the address box.
- Later, on the next page fill in all the Linksys extender login details.
- Next, click on the setup wizard option and then pick the WiFi network that you want to configure.
- In the end, enter all the relevant information. By doing this the Linksys RE7000 setup is successfully complete now.
Through WiFi Protected Setup Way
- First, in the upwards direction attach the antennas to the extender.
- After that, press the WPS button of the Linksys RE7000 extender, and in a short period of time press the existing router WPS button.
- Now, the WPS LED starts flashing solid on both router and extender gadgets.
- Thus it means, the extender and router are both gadgets successfully linked with each other.
- Further, place the Linksys RE7000 extender in the location where you want high-speed internet.
By considering the steps of the above two methods the Linksys RE7000 setup process is successfully done without facing any trouble. In any case, if you are facing issues such as the extender and router being successfully linked but not to the internet. The extender flashes a red LED, etc.. then consider the lower fixing tips to remove that issue.
Fix Linksys RE7000 Extender Troubles
To resolve any kind of trouble with the Linksys RE7000 extender, try the below solution tips.
Place RE7000 Extender At The Half-way Location Of The Office
To get the signal in all directions or to fix the extender issue we suggest that you place the extender at the halfway location. Also, make sure that you don’t settle the extender near metal or electronic appliances because they absorb all the WiFi signals which come from the extender and router device.
Remove Unauthorized Users Or Extra WiFi Devices
If your WiFi gadget connects with the Linksys RE7000 gadget but that device is not in use then try to remove that device from your WiFi device connected list.
Update Software Of Linksys RE7000 Extender
To upgrade the extender software of Linksys, go to the web management page. After visiting that page click on the network administrative option and then click or hit on the software upgrade icon. Now, if you see the latest version of the software file then download or install it on a computer or laptop. In the end, restart the Linksys extender to finish the latest software installation process.
Reset RE7000 Extender
On the left side of the Linksys RE7000 extender, below the WPS button, you can see the reset button. Press that reset button by inserting a hairpin in it. Now, all the extender LEDs will be turned off. As it means the extender device is now completely reset.
Note: Do the Linksys RE7000 setup procedure again.
Later the whole study of this page you will be able to do the login and setup process by yourself. There are many different Linksys extender models available in the market. If you are having other Linksys extender devices such as the RE6500 extender then try to visit the Linksys RE6500 setup page and read all the page directions.